Smart Room Booking System for Businesses | HeatingSave

Energy Management

Room Bookings are automatically translated into Heating patterns by the software, so the heating perfectly matches the building's use. Heating is automatically turned down when heating zones are not in use. no more — accidentally forgetting to switch off the heating!
The Heating Diary lets you make instant changes
Automatically turns down the boiler in warm weather and up when it's cold.
Automatic occupancy sensors turn down the temperature to a background level when areas are not used and quickly bring it up to temperature when they are re-occupied.
Heat-loss algorithm learns the "heat loss profile" of each heating zone within your building, switching on the heating at the latest possible time, later if it's warm and earlier if it's cold
Automatic summer control of immersion heaters, reducing electricity consumption.
Hot water priority varies hot water temperatures based on demand.
Fuel-efficient frost protection by using the residual heat within the heating system and building.
Software shows the total kWh's consumed and CO2 produced.

Control Access with HeatingSave smart card scanners

Smart Card Access Control

Access control 2 doors. (3 to 5,000 more doors can be incorporated using additional Smart Card controllers).
Holds details on up to 1,000 Smart Card users. 1,000's more can be added using additional HeatingSave products.
Smart Card does not need to be removed from a wallet or purse to be used — reads as fast as you walk.
Email warnings & alerts.
Fire panel input to automatically open doors when fire alarms are activated.
Speech output announcing flagged arrivals and security (available at additional cost).
Intruder alarm output for forced entry with email alerts.
Power fail battery backup (available at additional cost).
User feedback and warning lEd's.
Audible alerts.
Tamper detection.
Easy to use web enabled software allows remote monitoring and control.
Adheres to international security standards applicable to Access Control systems; En50133 parts 1, 7 and 2; gW18, pC79 and dd243I2002.

Fire and Smoke Alarm

Smoke detectors can be connected to HESM so that if they are triggered, they not only sound their internal alarm, but also HESM can use spare relay outputs to activate other sounders and email alerts to others of the problem. The software user can also create action alerts against room temperature sensors so that if they exceed their normal operating temperature, an automatic email alert is generated. Here, low and high set-points can be actioned with email alerts.

HeatingSave System working with Intruder detection

Intruder Alerts

HESM has an intruder alert system built into it, which can be set/unset locally or via an Internet connection. Any rooms that have occupancy sensors to better manage the heating can also use these to:

Activate intruder alarms
Send warning emails

If people are detected when intruder zones are armed, and people are not expected to enter. Intruder zones can be disarmed via:

The Internet
locally via a switch
using Smart Cards when bona fide people enter the building or protected areas.

Alarms and email alerts can also be activated if access controlled doors are forced open.

Room Booking System

Energy Management

Smart Card Access Control

Fire and Smoke Alarm

Intruder Alerts

KEY FEATURES